Water Bath Memmert WTB series
A laboratory water bath with the highest degree of comfort
Water bath WTB
The Memmert water bath for the temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segmentis available in six model sizes. The operating conceptof the wather bath WTB impresses with its intuitive and convenient menu navigation. A special highlight: with the customizable, remote view CustomView, you can always keep an eye on the important information.
- temperature range up to +100 °C
- 6 model sizes (7 to 51 litres volume)
- extensive range of accessories: e.g. flat or gable cover, shaking device, circulation pump
- state-of-the-art control technology
- high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
| Temperature | |
| Temperature Sensor | Digital temperature sensor, mounted on the outside of the bath |
| Temperature | Setting Celsius / Fahrenheit |
| Working temperature range | at least 5 above ambient to +100 (with cover, depending on ambient pressure) |
| Setting temperature range | (+10 to +100 °C) |
| Setting accuracy temperature | 0.1 °C |
| Control technology | |
| Calibration | 2-point calibration |
| Controller | intuitive 3.5″ colour graphic display with touch screen |
| Controller | digital display of set and actual temperature and of (remaining) programme time |
| Safety | |
| Temperature control | two-stage safety system to prevent overtemperature (pressure sensor for level monitoring, thermal fuse for heating shutdown in case of error) |
| Temperature control | individually adjustable overtemperature alarm, visual and acoustic |
| Temperature control | Independent temperature limiter to switch off the heating in case of failure |
| Autodiagnostic system | microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator |
| Heating concept | |
| Heating | corrosion-proof large-area heating on the outside of the interior |
| Standard equipment | |
| Cover | Stainless steel gable cover |
| Drain system | innovative drain system – easy to empty |
| Timer | digital timer from 1 min. up to 99 hours 59 min., visual and acoustic |
| Ambient conditions | |
| Installation | The vent openings in the left and back side must remain unobstructed. The distance to the wall must be at least 100 mm on the sides and at least 150 mm to the rear. The minimum spacing from the top of the bath to the next ceiling is 750 mm. |
| Ambient temperature | +5 °C to +40 °C |
| Humidity rh | max. 80 %, non-condensing |
| Overvoltage category | II |
| Pollution degree | 2 |
| Packing/shipping data | |
| Transport information | The appliances must be transported upright |
| Customs tariff number | 8419 8998 |
| Country of origin | Federal Republic of Germany |
| WEEE-Reg.-No. | DE 66812464 |
| Net weight | approx. 18 kg |
| Gross weight carton | approx. 21 kg |
| Catalog No. | Detail |
| WTB6 | Water Bath with Gable cover, Volume 7 L |
| WTB11 | Water Bath with Gable cover, Volume 10 L |
| WTB15 | Water Bath with Gable cover, Volume 17 L |
| WTB24 | Water Bath with Gable cover, Volume 23 L |
| WTB35 | Water Bath with Gable cover, Volume 37 L |
| WTB50 | Water Bath with Gable cover, Volume 51 L |
